S.J. Electro Systems | Leroy Somer | CIMM
 |
Pumps and valves are used to convey and control liquids in the widest range of applications imaginable, be it in the chemical or food processing industry, in waste water disposal or sewage treatment, in water recovery or water supply, in offshore applications or energy generation. The requirements to be met are manifold.With time pumps and valves have become more and more sophisticated technical components. Their development and production call for a profound knowledge of materials as well as timetested production know-how. Application-oriented materials research and state-of-the-art design and construction methods are therefore indispensable prerequisites. It goes without saying that modern electronics are a key factor. Using computer-controlled test beds simulating realistic operating conditions, KSB develops solutions to customer requirements all over the world. Examples are electronic monitoring equipment for reliable and economical operation or control instruments for pump efficiency optimization. Sizeable investments in research, the development of new products and new fields of application as well as qualified staff are the basis for our corporate success. |
 |
The name TORO 25 selected for the duct carrying liquids and gases, conceived by A.T.P. s.r.l., well synthesizes its own qualities: resistance, strength, elegance.
TORO 25 belongs to PN25 class, and for its production it is used the Polypropylene Random Type 3 with hing molecular weigth guarantees the system for over 50 years. H is combined with additives in order to realize faultless pipes and pipe fittings and it is ideal for the carriage of liquids under pressure with high and low temperatures such as to pass the required tests by DIN standards and above all by DVGW regulation brightly. |
 |
Millars WPD pump range provides a selection of water pumps each fitted with automatic vacuum priming system. These pumps are used on construction projects for wellpoint dewatering, sump pumping and for pumping from temporary wells forming part of the ground water drainage system. They are also used extensively for the movement of clean water and for municipal applications including irrigation and storm water control.
Millars WPD pumps are supplied with a range of different engines from single to six cylinder capacity and include optional silent pack equipment for low noise specifications. For fixed base applications or where electrical power supply is preferred, the pumps are powered by 3 phase electric motors equipped with starters, thermal cut outs, etc. Each pump is long coupled for ease of maintenance and long term reliability. Pumps are mounted either on skid frames or mobile chassis fitted either with solid lyres for site movement or pneumatic lyres for rapid transit by road. Alternative "sledge" type mounting can be supplied to allow the pumps to be skidded across the job site (preferred for use in coastal applications or where the ground is very soft and sandy). Each Millars WPD pump may be supplied with a broad range of accessories including suction and discharge pipework, wellpointing network system, well casings, bends, strainers, flexible hoses and adaptors. The SRA range are comprehensive range of solids handling pumps designed for handling sewage, dirty water and a wide range of liquid-solids mixture. Flow capacities range from 100 - 500 m^3/hr; head heights from 10 to 40m. Engine capacity and type to suit requirements.. |
 |
For more than 100 years, Horseley Bridge has been solving water storage problems, offering solutions based upon sound engineering principles and state-of-the-art technology. HBT's wide experience in sectional tank design has enabled our range of Pressed Steel and GlassReinforced Plastic (GRP) products to stand the test of time, and improvements are made continuously through our product evaluation and development programme.
The Horseley Bridge GRP sectional tank has an extremely rugged but highly portable design which is ideal for use in sites with restricted access and for shipment into the most inaccessible areas of the world using the most basic means of transport. Assembly is simple and quick, requiring only hand tools and the minimum of skilled labour. Tanks can be equally easily dismantled for removal to another site, thanks to HBT's EPDM rubber sealing system which requires only the gaskets and fixings to be replaced during reassembly. HBT tanks can be found throughout the UK and many parts of the world, particularly in the emerging nations, where water - the basis of life - is often difficult to obtain and has to be preciously guarded. The noncorrosive nature of GRP makes HBT tanks ideal for installations where climatic conditions are harsh and/or where water quality is poor or aggressive. Tanks can be provided for ground-level installation or elevated on steel structures that are specifically designed and fabricated by Horseley Bridge Tanks. |
 |
The Ajax Elite model has 33 models with grease lubricated bearings and a further 4 models with oil lubricated bearings giving a very wide hydraulic coverage at 4 pole and 2 pole speeds.
All dimensions of the Elite range comply with DIN 24255 allowing for full interchangeability with equivalent pumps. Most models are suitable for 16 bar working pressure compared to the 10 bar limit of other similar products. The modular construction of the Elite ensures the maximum utilization of componentry across the range. And all Ajax products are backed by excellent warranty and service via our Branch Office network in Australia and our Official Distributors overseas. Please contact us for friendly professional advice. |
 |
S.J. Electro Systems, Inc. carries a wide range of water
pump accessories. Items they create include pump switches, alarm systems, control
switches, and other accessories.
|
 |
The right motor for each application. Leroy-Somer
specialise in drives, carrying the most extensive range of
drive systems.
|
 |
CIMM is the ultimate in water tanks, made in Italy.
|